The fridge is warm or not cooling enough
Dealing with "The fridge is warm or not cooling enough"? You are not alone, and you can often find the cause yourself. Check a warm fridge safely and protect the food. Then find out if settings, airflow, the door or a fault is the cause.
What you can check yourself
- Move perishable food somewhere cold, aiming for +4 °C. Keep doors closed and do not leave food in a warm fridge. If you do not know how long it was warm, follow food-safety advice and never taste to test.
- Check the on/off control and that the plug is in. Check that a dry, undamaged plug is fully in and any socket switch is on. Do not unplug and restart again and again.
- Check the temperature setting in the manual. Check in the manual for any demo or holiday mode, and aim for +4 °C. Write down any error code before you change settings.
- Test the socket with a lamp you know works. Only if the socket is dry and easy to reach: unplug the fridge and test the socket with a lamp. If a fuse or breaker trips again, stop and call an electrician.
- Measure the temperature with a fridge thermometer. Put the thermometer on a middle shelf and keep the door closed for the waiting time, often up to 24 hours. The display may not show the real temperature.
- Clear the door and wipe the door seal. Move packages that block the door and wipe the seal with mild soapy water. Look for tears or gaps, but do not remove the seal.
- Check again with a fridge thermometer later. Keep the food elsewhere and measure after the waiting time, up to 24 hours. If it does not start to cool within a few hours, continue.
- Move food so air can flow past the vents. Leave space around the vents so cold air can flow. Do not push tools into the vents.
- Check the room temperature and the space around it. Look for covered grilles, direct sun or heat nearby. Check only what you can see; do not move the appliance or remove panels.
- Look for frost or water without removing panels. A few drops or thin frost on the back wall can be normal. Do not chip ice, use a hairdryer or pour hot water inside.
- Listen for the compressor for about 30 minutes. Listen from the front; do not touch the compressor or reach behind the appliance. Pauses, clicks and gurgling are normal.
When should you call a technician?
- Arrange a professional diagnosis. We cannot safely point to one fault. It may be the electronics, a sensor, the fan or the cooling system.
Want help finding the cause? The button below starts a step-by-step guide that asks a few simple questions.
Applies to
Fridge · All models
The guide covers
- Door or gasket not sealing
- Compressor start or drive fault
- Compressor fault
- No power at the socket
- Unsuitable room temperature
- Sealed cooling circuit fault
- Automatic defrost fault
- Internal fan or air-distribution fault
- Temperature sensor or control fault
- Internal electrical supply fault
- Excessive ice buildup
- Insufficient heat dissipation
Stop if you see smoke, sparks, a damaged cable or water near electrical parts, or smell burning or gas. Do not touch wet or damaged electrical parts.